EasyMIG 210LED : MIG welder

Home page

MIG welders

EasyMIG 210LED

EasyMIG210LED

SPARTUS^®
EasyMIG 210LED

SMALL AND SIMPLE SYNERGIC INVERTER WELDING MACHINE

1 / 6

Technical parameters

Input	~1× 230V ± 10% 50 / 60 Hz
Welding current MIG [A]	50 – 200
Duty cycle MIG [%]	60
MIG PARAMETERS
Output working voltage MIG [V]	16,5 – 24
Wire feeding speed [m/min]	2 – 12,5
Wire feeder	builid-in, 2 - roll gear
Welding wire spool [mm]	≤ 5[kg], Ø200
Wire diameter Ø [mm]	0.6 / 0.8 / 1.0
2T/4T switch
Inductance control
Wire test
Synergy
Manual correction to synergy
MIG/MAG polarization change
TIG PARAMETERS
TIG welding
Welding current TIG [A]	10 – 200
Duty cycle TIG [%]	60
MMA PARAMETERS
MMA welding
Welding current MMA [A]	10 – 160
Hot Start
Arc Force
VRD
Duty cycle MMA [%]	60
OTHER
Max. current consumpiton [A]	MIG 39 / TIG 29 / MMA 34
Power factor (cosφ)	0,73
Efficiency η [%]	77
Insulation class	H
Protection class	IP21S
Weight [kg]	10
Dimensions [mm]	470 × 190 × 330

Download data sheet Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge Click on photo to enlarge

Description:

EasyMIG 210LED – A SMALL AND SIMPLE SYNERGIC INVERTER WELDING MACHINE

SPARTUS^® EasyMIG 210LED is a small semi-automatic welding machine made of inverter technology using IGBTs. Enables welding methods: MIG/MAG, TIG Lift current up to 200A and MMA to 160A. It is powered from single phase 230V source power.

A PORTABLE INVERTER WELDING MACHINE FOR EVERYONE

EasyMIG 210LED 210LED is an intuitive welding device characterized by simplicity that novice welders will certainly appreciate. Thanks to its low weight and compact design, it is perfect as a portable semi-automatic welding machine. Any maintenance work in the field is the perfect job for this machine.

A simple and intuitive LED display allows you to easily manage the parameters of the welding machine.

3 WELDING METHODS IN ONE MACHINE

MIG SYNERGY

SPARTUS^® EasyMIG210LED is equipped with synergistic programs for MIG / MAG welding with steel wires in the range diameter 0,6 / 0,8 / 1,0 mm. In addition, the machine has an ability to manually adjust set parameters. Other parameters will be adjusted by the device automatically.