SPARTUS®
ProMIG 535 DUAL PULSE
SYNERGIC MIG WITH DOUBLE PULSE
Technical parameters
Input | ~3× 400V ± 10% 50 / 60 Hz |
Welding current MIG [A] | 10 500 |
Duty cycle MIG [%] | 60 |
MIG PARAMETERS | |
Wire feeder | separate, 4 - roll |
Welding wire spool | ≤ 15 / ∅200/300 |
Wire diameter Ø [mm] | 0.6 / 0.8 / 1.0 / 1.2 / 1.6 |
Wire feeding speed [m/min] | 1.5 24 |
Wire feeding test | ![]() |
2T / 4T control | ![]() |
Welding with pulsation P1 and P2 | ![]() |
Spool Gun | ![]() |
Synergic | ![]() |
DUAL PULSE | ![]() |
TIG PARAMETERS | |
TIG welding mode | TIG DC |
TIG welding current [A] | 10 500 |
Duty cycle [%] | 60 |
Gas pre flow [s] | 0 10 |
Up slope [s] | 0 10 |
Down slope [s] | 0 10 |
Gas post flow [s] | 0 10 |
2T/4T control | ![]() |
Arc ignition | LIFT |
MMA PARAMETERS | |
MMA welding mode | ![]() |
MMA welding current [A] | 10 500 |
Hot Start | 0 10 |
Arc Force | 0 10 |
Duty cycle [%] | 60 |
OTHER | |
Max. current consumpiton [A] | MIG 41.4 / TIG DC 34.4 / MMA 41.4 |
Power factor (cosφ) | 0,77 |
Insulation class | H |
Protection class | IP21S |
Water cooler | ![]() |
Tank capacity [l] | 5 |
Weight [kg] | 101.5 |
Dimensions [mm] | 1150 × 590 × 1430 |
Description:
SPARTUS® ProMIG 535DP is high-end, modern inverter welding machine constructed on the
basis of advanced PWM technology and professional IGBT transistors.
It enables MIG / TIG DC and MMA welding with a current up to 500A. It is powered from three
phase 400V source power.
The device offers a wide range of possibilities for the above-mentioned methods of joining metals.
MIG welding
ProMIG 535 DP is equipped with a synergistic system for MIG / MAG welding with the possibility
of selecting the following programs: for mill steel, stainless steel, aluminum welding and braze welding. It is possible to manually correct the parameters.
In addition, the device has a number of functionalities supporting the welding process in the
MIG method:
– 1P (Pulse) – MIG/MAG welding with pulsation, which significantly facilitates obtaining a spray arc
– 2P (Dual Pulse) – MIG/MAG welding with dual pulse, in TIG quality
– JOB mode – save and call 10 different job records
– 2T/4T / s4T / SPOT Trigger Control
– Burn Back
– Slow Feed
– Pre Gas and Post Gas.
Separate high-class four-roller feeder ensures stable wire feeding. An additional advantage is
also the possibility of welding with the Spool Gun.
TIG welding
Thanks to the solutions used, the ProMIG 535 DP also enables advanced welding with the TIG
Lift method.
ProMIG 535 DP has functions supporting the welding process in TIG method:
– 2T/4T Trigger Control,
– Down Slope.
MMA welding
The process of joining metals in this method is additionally supported by functions such as:
– Arc Force
– Hot Start.
Modern design, LCD function panel and the possibility of wireless control in combination with
high-class components makes the SPARTUS® ProMIG 535 DP stand out on the market.
The professional device of the SPARTUS® Pro line s perfect suited to the production sector and
industry.
SPARTUS® ProMIG 535DP package:
Device SPARTUS® ProMIG 535DP
Separated wire feeder 4R
Cooler
Hypercoolant - cooling liquid 5l
Driving set
MIG Gun SPARTUS® SPP 501 3m
5m connection cable set
3m electrode holder
3m mass cable with screw clamp
User's manual

